Blade ICE BMD00178 manual Bpdu Guard

BLADEOS 6.3 Application Guide

BPDU Guard

BLADEOS 6.3, BPDU Guard is now configured on a per-port basis, rather than globally. The following commands have been moved in the CLI:

Old CLI Path	New Path
/cfg/l2/bpduguard {enadis}	/cfg/port <#>/bpduguard {enadis}

The equivalent ISCLI Global Configuration Mode command has moved to the Interface Port Configuration Mode:

Old ISCLI Path New Path

(config)# spanning-tree bpdu-guard (config)# interface port <x>

(config-if)# bpdu-guard

During upgrade to BLADEOS 6.3, any current BPDU Guard configuration will be automatically converted. If the prior global BPDU setting was enabled, that setting will be removed, and BPDU Guard will be applied to all ports where the port fast-forward feature is enabled. This conversion will also be applied when loading configuration scripts from previous releases.

Note – If you want to apply BPDU Guard to different ports than configured with port fast-forward, after any conversion, review the interface port configuration and make any appropriate changes manually.

26 BMD00178, April 2010