Blanco B 830FX operation manual Model NO. B

MODEL NO. B 830FX

PART I D E ~ C A T I O NSHEET

1.FASCIA ASSEMBLY

2.MOUNTING T-iRAR/LE,ASSEMBLY

3.BASE ASSEMBLY

4 . 6 off 6 GUAGE SCREWS

CAUTION

Read and follow all of the instructions completely.

1 The Blanco Built-in Trim Kit must be installed in accordance with the full set of instructions listed and meet the regulations laid down by electrical authorities, building regulations and the requirements of state and local government authorities.

2The microwave oven must be unplugged before installation of the Blanco Built-in Kit.

3For safe use of the microwave oven, DO NOT modify or alter any part of this kit.

4The kitchen cabinetry that houses the microwave oven must be constructed to allow the microwave oven to operate to Australian Standards 3350.1-2002, 60335.1,3350.2.25-2001 and 60335.2.25.

CLEANING TIPS

\Use a domestic stainless steel cleaner, applied to a soft cloth. Wipe in the stainless steel grain direction. DO NOT use abrasive,

\harsh cleaners or scouring pads.

TSPECIFICATIONS

Overall Kit Dimensions;		Cavity Dimensions
Width	596mm	Internal Width	600rnrn
Height	380mm	External Front Height	381mm
Depth	22mm (Fascia)	Depth	5OOmm(MIN.)

Cabinetry Ventilation

An opening on the upper cavity panel must be cut for air circulation. This opening should be placed at the rear- minimum 600mm x 100mm.