Blanco BFDW8 manual White marks

PTroubleshooting,ésentati n de votrewhatlaveto do?-vaisselle

Poor washing results	Possible causes	What to do
White marks	- Chalky film (can be	- Check that there is salt
(Identify the nature of	removed with vinegar).	in the reservoir (light
the marks)		unlit = OK)
		- Check the water hardness
		at the tap and that the
		water softener is set cor-
		rectly. Set it on a higher
		setting if necessary.
		- Water too hard for using
		a “3 in 1” detergent
		recommended.
	- Traces of salt	- Check that the salt pot’s
	(item has a salty taste)	stopper is firmly closed.
	- Opalisation of the glass	- Check the water hard-
	because water too soft	ness at the tap and that
	(cannot be removed).	the water softener is
		set correctly. Some
		detergent tablets are
		more aggressive to
		glasses and decorations
		(change the detergent,
		use a protective product
		if necessary).
Coloured marks (tea,	- Items poorly arranged	- Turn the open ends (of
wine, coffee, blood)		glasses, bowls, etc.)
		towards the jets
	- Not enough or poor	- Increase the amount of
	detergent	detergent
	- Programme with too	- Select a more suitable
	low a temperature.	programme, with a
		higher temperature.
Run marks or dried	- Insufficient or no rinse	- Check the indicator light
droplets on the glasses	aid.	and fill the reservoir
		completely, set the dis-
		penser to the upper
		position if necessary.
	- Poor or out-of-date	- Replace with a recent
	rinse aid.	agent (a good rinse aid
		dilutes easily and foams
		in cold water).
24

PTroubleshooting,ésentati n de votrewhatlaveto do?-vaisselle

Poor operation	Possible causes	What to do
Traces of rust on stainless	- The quality of the stain-	- Use special “dishwa-
steel	less steel (in knives in	sher-safe” cutlery
	particular) is unsuitable	- Check that the salt pot’s
	for washing in a machine.	stopper is firmly closed.
Poor washing results	Possible causes	What to do
A lot of drops on the	- Insufficient or no rinse	- Check the indicator light
glasses	aid.	and fill the reservoir
		completely.
	- The dose has not been	- If the reservoir is not
	distributed.	empty after approxi-
		mately 60 washes, call
		a service agent.
	- Position of the items.	- To relieve the problem,
		arrange the items so as
		to restrict as much as
		possible any water
		retention: if possible,
		leave the door ajar for a
		few minutes.
Drops on plastic glasses,	- These insulating items	- Arrange them optimally,
Tefal coatings, etc.	have a low calorific	prioritising the use of
	mass.	the upper basket if pos-
		sible.
Drying not as good in	- In the rapid pro-	- Select the most appro-
rapid programmes.	grammes, the drying	priate rapid programme.
	temperature and the
	drying time are reduced
	to restrict the length of
	the cycle to a minimum
	level.
Condensation on the	- Condensation may form
walls of the inner door or	on the walls, particular-
the tub.	ly after cooling down
	(sound insulation
	increases its occurren-
	ce).

25