Blanco BFDW8 manual Regularly clean if required, Prolonged stoppage, To re-inset the filters

RunningPrése tationMaintenancede votre lave-vaisselle

RunningPrése tationMaintenancede votre lave-vaisselle

Cleaning the waste filters The filtration system consists of several components:

A – The two-part waste filter B – The main filter

C – The micro-filter

The filters are located in the mid- dle of the tub and must be cleaned regularly to ensure opti- mum washing results.

Regularly clean (if required):

All around the door and the door seal with a damp sponge to remove any deposits.

Every year

Only use soap and water on the casing

and the control panel.

Do not use abrasive powders,

➀Before removing the filters, remove any waste from the main filter with a spon- ge to avoid the waste blocking the sprinkling arms.

➁Unscrew the waste filter a quarter turn and remove it.

③Remove the main filter

④Remove the micro-filter.

A B

C

To ensure your machine’s long- term operation, clean it once or twice a year by running an Intensive programme with the machine empty, using a commer- cially available special dishwasher cleaning product.

Prolonged stoppage

Clean your dishwasher completely, then disconnect the power supply and close the water tap.

Keep your machine away from the risk of frost.

metal sponges, alcohol-based products or thinners.

Use a soft cloth or a sponge.

If you are moving, to avoid any water lea-

king, first of all run a soak pro- gramme.

A - Two-part waste filters.

⑤ Carefully clean all	the filters
under running water.		C

To re-inset the filters

Follow the above instructions in reverse.

Important: Do not forget to lock the

waste filter by turning it a quarter turn.

18

19