Blanco BMO300X operation manual Setting The Minute Timer, Setting Cooking Times With Power Levels

30 Litre Operation Manual 2007.qxp 12/07/2007 3:00 PM Page 9

SETTING THE MINUTE TIMER

1.Touch TIME pad.

2.Enter the amount of time you wish to set the timer for by touching the number pads. Digit time is in minutes and seconds and set left to right. Set one digit (eg. press 5 for 5 seconds) or up to four digits (2405 for 24 minutes, 5 seconds).

3.Touch POWER pad.

4.Touch number pad 0 (TIMER).

5.Touch START pad.

NOTE: Touch TIME and then touch CANCEL to cancel TIME during timing process.

SETTING COOKING TIMES WITH POWER LEVELS

A. One-Stage Cooking

1.Touch TIME pad.

2.Use the number pad to set a cooking time. You can set a cooking time from one second to 99 minutes and 99 seconds. If you are setting a time greater than one minute, you must enter numbers for both minutes and seconds.

FOR EXAMPLE: To set 20 minutes, enter 2, 0, 0, 0.

3.If you want to set a power level other than 100% power, touch POWER, then use the number pads to enter the power level. You can set the power level from 1 to 9 (see scale below).

4.Touch START to start cooking.

USE THESE SINGLE DIGITS TO REPRESENT OVEN POWER LEVELS

Number pad	9	8	7	6	5	4	3	2	1	0
% of Power	90%	80%	70%	60%	50%	40%	30%	20%	10%	TIMER

B. Two-Stage Cooking

Some recipes require different stages of cooking at different temperatures.

1.SET STAGE 1: Follow steps 1-3 in "One-stage Cooking". DO NOT TOUCH START PAD.

2.SET STAGE 2: Touch MEMORY pad, touch TIME then use the number pad to enter the STAGE 2 cooking time. Touch POWER then use the number pad to enter the STAGE 2 power level. (Most 2 stage recipes use lower power for second stage).

3.Touch START pad.

NOTE: The respective lights will come on to indicate which stage the oven is operating in. After total time has elapsed, 3 beeps sound. After a cooking or defrosting program has completed, the oven will automatically continue to sound three beeps every two minutes until the door is opened or the CANCEL pad is touched.

PRE-SET FUNCTION

Suppose you want to set the oven to start-up at 2 o'clock.

1.Touch PRE-SET pad.

2.Touch 2, 0, 0 on number pad.

3.Set the cooking time(s) with power levels for one or two stage cooking (refer above).

4.Touch START pad.

5.Touch CANCEL to cancel the pre-set function.

NOTE: Be sure the clock is set at the correct time of day before programming the PRE-SET function.

9