Blaupunkt 420 BT Selecting tracks, Fast searching, Interrupting playback, Scanning all tracks

CD/MP3/WMA/iPod mode

If the USB data carrier is initially selected as audio source, the data are read first.

Notes:

•If the connected USB data carrier cannot be seen, "USB ERROR" is briefly displayed.

•The time required for reading in the data depends on the design and size of the USB data carrier.

Removing a USB data carrier

￿Switch off the car sound system so that the data carrier will be correctly unregistered.

￿Disconnect the USB data carrier.

￿After you pulled off the data carrier from the

USB port at the front of the device, close the protective cap of the USB port :.

Inserting/removing the memory card

Inserting the memory card

￿Detach the control panel.

￿Insert the memory card with its labelled side up and its contacts first into the card slot B until it clicks into place.

￿Attach the control panel.

After switch-on, the device automatically selects the inserted memory card as audio source. The data of the memory card are be- ing read. Afterwards, the playback starts in MP3 mode.

Notes:

•If the inserted memory card cannot be played, "SD ERROR" is briefly displayed.

•The time required for reading the card depends on the design and size of the memory card.

Removing the memory card

￿Detach the control panel.

￿Push on the memory card until it disengages.

￿Pull the memory card out of the card slot B.

￿Attach the control panel.

Selecting tracks

￿Turn rotary control 7 one notch counter- clockwise or clockwise to change to the pre- vious/next track.

Notes:

•If you turn rotary control 7 several notches counter-clockwise or clockwise, you jump forward or reverse by the corre- sponding number of tracks.

•If the current track plays longer than 3 seconds and you turn rotary control 7by one notch counter-clockwise or clockwise, the tracks starts playing again.

Fast searching

￿Press the rotary control 7once.

The display briefly shows "CUE/REVIEW".

￿Turn the rotary control 7 until the desired position has been reached.

Note:

If you press the rotary control 7 twice, the

display briefly shows "TRACK SELECT". By turning the rotary control 7, you select a different track.

Interrupting playback

￿Press the 3 button > to interrupt the playback ("PAUSE") or to continue it.

Scanning all tracks

The scan function scans all available tracks.

￿Press the rotary control 7for approx. 2 sec- onds to start the scan, or briefly to continue playing the currently scanned track.

During the scan, the display alternately dis- plays "SCAN" and the current track number or file name.

Note:

The scan time can be adjusted (see the chap- ter "User settings", section "Making settings in the "VARIOUS" menu", menu item "SCAN TIME").

12