Blaupunkt 420 BT, 320 Safety notes, Symbols used, Road safety, General safety notes, Danger

Models: 420 BT

1 40
Download 40 pages 49.56 Kb
Page 4
Image 4
Safety notes

Safety notes

Safety notes

The car sound system was manufactured accord- ing to the state of the art and established safety guidelines. Even so, dangers may occur if you do not observe the safety notes in these instructions.

These instructions contain important informa- tion to easily and safely install and operate the car sound system.

Read these instructions carefully and com- pletely before using the car sound system.

Keep the instructions at a location so that they are always accessible to all users.

Always pass on the car sound system to third parties together with these instructions.

In addition, observe the instructions of the devices used in conjunction with this car sound system.

Symbols used

These instructions employ the following symbols:

DANGER!

Warns about injuries

CAUTION!

Warns about damaging the CD drive

DANGER!

Warns about high volume

The CE mark confirms the compliance with EU directives.

￿Identifies a sequencing step

• Identifies a listing

Road safety

Observe the following notes about road safety:

Use your device in such a way that you can always safely control your vehicle. In case of doubt, stop at a suitable location and operate your device while the vehicle is standing.

Remove or attach the control panel only while the vehicle is standing.

Always listen at a moderate volume to pro- tect your hearing and to be able to hear acous- tic warning signals (e.g. police sirens). During mute phases (e.g. when changing the audio source), changing the volume is not audible. Do not increase the volume during this mute phase.

General safety notes

Observe the following notes to protect yourself against injuries:

Do not modify or open the device. The device contains a Class 1 laser that can cause injuries to your eyes.

Do not increase the volume during mute phases, e.g. when changing the audio source. Changing the volume is not audible during a mute phase. Do not increase the volume dur- ing mute phases, e.g. when changing the audio source.

Use as directed

This car sound system is intended for installation and operation in a vehicle with 12 V vehicle sys- tem voltage and must be installed in a DIN slot. Observe the performance limits in the technical data. Repairs and installation, if necessary, should be performed by a specialist.

Installation instructions

You may only install the car sound system your- self if you are experienced in installing car sound systems and are very familiar with the electrical system of the vehicle. For this purpose, observe the installation instructions at the end of these instructions.

4

Page 4
Image 4
Blaupunkt 420 BT, 320 Safety notes, Symbols used, Road safety, General safety notes, Danger, Use as directed