Installation instructions

Installation instructions

Safety instructions

When carrying out installation work and making connections please observe the following safety instructions:

Disconnect the negative terminal of the bat- tery! When doing so, please observe the vehi- cle manufacturer’s safety instructions.

Make sure you do not damage vehicle compo- nents when drilling any holes.

The cross sections of the positive and negative cables must not be less than 1.5 mm².

Do not connect the vehicle’s plug connec- tors to the radio!

You can obtain the adapter cable required for your vehicle type from any BLAUPUNKT dealer.

Depending on the model, your vehicle may differ from the description provided here. We accept no responsibility for any damages due to incorrect installation or connection or for any consequential damages.

If the information provided here is not suita- ble for your specific installation requirements, please contact your Blaupunkt dealer, your ve- hicle manufacturer or our telephone hotline.

When installing an amplifier, you must first con- nect the device earth connections before con- necting the plugs for the line-out jacks.

Earth connection of external devices may not be connected to earth of car sound system (housing).

Supplied mounting hardware

1 011 202 320 / 1 011 202 420:

1 011 202 321 / 1 011 202 421:

33

Page 33
Image 33
Blaupunkt 320 Safety instructions, Do not connect the vehicle’s plug connec- tors to the radio, Installation instructions