To reduce the effects of interference and/or poor signal strength, several features have been included within the radio which work automatically when needed:
•Noise Blanking Circuit
(FM interference suppression) - To reduce pulse interference, a Noise Blanking Circuit is included.
•Soft Muting Circuit - The
•Multipath Detection Circuit - If repeated multipath signals are received, the circuitry will switch the radio into MONO mode and slightly reduce the treble response. It will gradually return to STEREO with full treble response when multipath conditions are no longer being experienced.
CD Operation
CD Loading
Ensure that the CD entry slot 6 is clear. Insert the CD (lettered side up) into the slot until the CD is automatically received and taken.
The CD operation will automatically override the radio. The display shows 'CD'.
After the CD has been accepted, the player begins with the first track on the CD. Initially the total number of tracks on the CD is shown as 'TxxCD' followed by:
TRACK | DISC IN |
01 | CD |
|
|
After the last track has been played, playback of the CD begins again, starting with the first track.
If the CD has been inserted incorrectly, the display will show 'CD ERROR'.
Please note:
It is possible to insert and load a CD while the car's ignition is turned off. Playback will commence immediately after the CD is loaded.
CD Selection
Press CD button 2 to activate the CD mode.
If you select the CD mode and there is no CD in the radio the display shows 'NO DISC' for 2 seconds. The radio will continue playing.
CD Pausing
Pressing the CD button 2 while playing a disc will pause the CD.
The display will show:
PAUSE
To resume the playing of the CD press button 2 again.
Track Selection
You can select a desired track on a CD by briefly pressing button ; <TUNE/TRACK>
Press button TRACK> ; to go on the next track or press repeatedly until desired track appears in the display.
Press button <TRACK ; to go back to the start of the current track or press repeatedly until desired track appears in the display. If the track has been playing for less than 3 seconds and button <TRACK ; is pressed, the previous track will be played. If you press button <TRACK ; after the first 3 seconds, the current track is restarted.
Fast Forward / Fast Back (Track Cue/Review)
Press button ; <TUNE/TRACK> for more than 2 seconds to rapidly move forward or backwards within the current track. The CD is played at a faster speed and at a lower volume. The display shows the number of the track and the elapsed time of the track in minutes and seconds.
8
