61
DANSK
ENGLISH DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Activating/deactivating the radio
text display
Some stations use the RDS signal to
broadcast scrolling texts known as ra-
dio texts. You can allow radio texts to
be displayed or you can block them.
➮Press the MENU button 9.
“TUNER MENU” appears in the display.
➮Press the OK button : to display
the tuner menu.
➮Press the or button 7 repeat-
edly until “R-TEXT” appears in the
display.
➮Press the or button 7 to
switch radio text on/off.
“R-TEXT OFF” means that no radio
texts will be displayed and “R-TEXT ON”
means they will be displayed.
➮Press the MENU button 9.
Traffic information
Your device is equipped with an RDS-
EON receiver. EON stands for En-
hanced Other Network.
Whenever a traffic announcement (TA)
is broadcast, the system switches au-
tomatically from a station that does not
provide traffic reports to the appropri-
ate traffic information station within the
broadcasting network that does.
Once the traffic report has been played,
the system will switch back to the pro-
gramme that you were listening to be-
fore.
Switching traffic information
priority on/off
➮Press the TRAF button =.
Traffic announcement priority is active
when the traffic-jam symbol lights up in
the display.
Note:
You will hear a warning beep:
●if you leave the reception area of a
traffic information station that you
are currently listening to.
●if, while listening to a CD or CD in
the changer, you leave the recep-
tion area of a traffic information sta-
tion that the system is tuned into
and the subsequent automatic
search cannot find a new traffic in-
formation station.
●if you retune the radio from a traffic
information station to a station that
does not broadcast traffic informa-
tion.
RADIO MODE TRAFFIC INFORMATION