62
If you hear the warning beep, you can
either switch off traffic information pri-
ority or tune into a station that broad-
casts traffic information.
Setting the volume for traffic
announcements
➮Press the MENU button 9.
➮Press the or button 7 repeat-
edly until “VOLUME MENU” ap-
pears in the display.
➮Press the OK button : to display
the volume menu.
➮Press the or button 7 repeat-
edly until “TRAFFIC” appears in
the display.
➮Adjust the volume using the
buttons 7.
When you have finished making your
changes,
➮press the MENU button 9.
Note:
●Using the volume control 5, you
can also adjust the volume during
a traffic announcement for the du-
ration of that announcement.
Note:
●You can adjust the sound settings
and volume distribution settings for
traffic announcements. For further
information, please read the
“Sound” chapter.
CD mode
You can use this device to play stand-
ard audio CDs, CD-Rs and CD-RWs
with a diameter of 12 cm. To avoid prob-
lems when playing CDs, you should not
burn CDs at speeds greater than 16-
speed.
Besides being able to play audio CDs
on this device, you can also play CDs
containing MP3 music files. For further
information, please read the chapter
entitled “MP3 mode”.
Risk of severe damage to the
CD drive!
CD singles with a diameter of 8 cm
and non-circular contoured CDs
(shape CDs) must not be used.
We accept no responsibility for any
damage to the CD drive that may
occur as a result of the use of un-
suitable CDs.
Switching to CD mode
●If there is no CD inserted in the
drive,
➮press the button 2.
The flip-release panel opens.
➮Gently insert the CD with its printed
side uppermost into the drive until
you feel some resistance.
The drive draws in the CD automatical-
ly.
You must not hinder or assist the drive
as it draws in the CD.
➮Gently close the control panel
whilst exerting a little pressure until
you feel it click into place.
The CD starts playing.
TRAFFIC INFORMATION CD MODE