52

Remote control

Calgary MP35
Your car radio is equipped with an inte-
grated infrared remote-control receiver.
The receiver is built into the detachable
control panel.
You can safely and conveniently con-
trol the majority of the device’s functions
using a steering-wheel remote control
or handheld remote control (available
as optional accessories).
You cannot switch the device on/off us-
ing the remote control.
Note:
The infrared receiver that is included
with the remote control only needs to
be installed (as described in the instal-
lation instructions) if there is no direct
line-of-sight connection between the
remote control and the car radio.
San Diego MP35
The San Diego MP35 is supplied with
the RC 12H handheld remote control.
The infrared receiver is built into the
detachable control panel. An additional
receiver is not included.
REMOTE CONTROL CLOCK TIME

CLOCK time

Displaying the clock time
To display the clock time briefly,
➮press and hold down the SRC
button = until the clock time ap-
pears in the display.
Setting the clock time
To set the clock time,
➮press the MENU button 7.
➮Press the or button 8 repeat-
edly until “CLOCK SET” appears in
the display.
➮Press the button 8.
The clock time appears in the display.
The hours flash and can be adjusted.
➮Adjust the hours using the but-
tons 8.
Once the hours are set,
➮press the button 8.
The minutes flash.
➮Adjust the minutes using the
buttons 8.
➮Press the MENU button 7 twice.
Selecting 12/24-hour clock
mode
➮Press the MENU button 7.
“MENU” appears in the display.
➮Press the or button 8 repeat-
edly until “24 H MODE” or “12 H
MODE” appears in the display.
➮Press the or button 8 to
switch between the modes.
02Calg/SanDiegoMP35_gb• 09.02.2005, 13:50 Uhr52