Blaupunkt 7 647 453 310 operating instructions Sound

Clock Sound

When you have finished making your changes,

￿press the OK button Brepeatedly un- til you reach the desired menu level for additional settings or completely exit the menu.

Displaying time permanently with device switched off and ignition switched on (Off Clock)

￿Press the MENU button A. The menu is displayed.

￿Press the softkey "Clock Settings" ;. The "Clock" menu is displayed.

To display the time when the device is off and the vehicle ignition is on,

￿press the softkey "Off Clock" ::

• : The time is displayed.

• : The time is not displayed.

When you have finished making your changes,

￿press the OK button Brepeatedly un- til you reach the desired menu level for additional settings or completely exit the menu.

Note:

You can replace the factory-selected wallpaper of the time display with your own. For further details, please read the section "Changing wallpapers of the display" in the chapter "Adjusting the display".

Sound

You can adjust the sound settings (bass, middle and treble) separately for each source (radio, CD, CD changer, AUX, traffic announcement and telephone/navigation). The volume distribution settings (balance and fader) and X-BASS apply to all the au- dio sources except for traffic announce- ments and telephone/navigation. You can adjust the volume distribution settings separately for traffic announcements and telephone/navigation.

Note:

The settings of the sound for traffic an- nouncements and telephone/naviga- tion can only be made during a traffic announcement or during a telephone call/voice output.

This device features a digital 3-band equal- izer. This equalizer allows for selecting one frequency each for bass, treble and middle and to adjust the level for the selected fre- quency between -7 and +7. In addition, you can adjust the quality factor for bass and middle.

The quality factor Q determines the filter quality of the equalizer, i.e. the edge steep- ness and filter bandwidth, dependent upon the characteristic frequency. A low quality factor means a low edge steepness and a high filter bandwidth; a high quality factor means a high edge steepness and a low fil- ter bandwidth.

ENGLISH

89