“unauthorised access” to your car radio. When the security code system is activated, the unique code must be entered each time the power to the unit was interrupted.

The radio will function again as soon as you have entered the correct code.

If you have lost your radio passport and forgotten the code number, your radio can only be made operable again by one of our authorised service workshops, which is sub- ject to payment.

Switching on security coding

To activate the coding system:

Turn off the radio.

Press buttons AF and > simultaneously and hold down.

Turn on the radio.

The display shows “CODE”.

Briefly press the FM·T button; the dis- play shows “0000”.

Enter the code number given in the Blaupunkt car radio passport.

Example: The code number is 2521.

-Press the FM·T button twice; the display shows “2000”.

-Press the AF button five times; the display shows “2500”.

- Press the TA button twice; the dis- play shows “2520”.

- Press the M·L button once; the dis- play shows “2521”.

To confirm the code number:

Press the > button.

Now the security coding system is active. The display will briefly show “C” each time the set is turned on.

If the display shows “CODE ERR”, you have entered a wrong code. Re-enter the correct code after the waiting time (“CODE” will ap- pear in the display).

If you switch off the set while it is blocked, the waiting time will start anew as soon as the radio is turned on again.

Re-start following an interrup- tion of the power supply

(coding system is activated)

Turn on the radio.

The display shows “CODE”.

Enter the code number given in the Blaupunkt car radio passport and con- firm (see example under “Switching on security coding”).

The unit is now ready for use.

Switching off security coding

Turn off the radio.

Press AF and > buttons simultaneously and hold down while

switching the set on again. The display shows “CODE”.

Now enter the code number to be found in the car radio passport and confirm (see example under “Switching on se- curity coding”).

Security coding is now switched off.

CODE LED

To indicate that your unit is equipped with security coding, the LED flashes for extra security when the car is stationary.

ENGLISH DEUTSCH

FRAN AISÇ

ITALIANO NEDERLANDS SVENSKA

ESPA OLÑ

PORTUGU SÊ

17

Page 7
Image 7
Blaupunkt ACR 3251 Switching on security coding, Re-start following an interrup- tion of the power supply