Blaupunkt AUSTIN CD41 English Français Português Español, Storing the station names, Press the

TUN/ TRK

TUN/ TRK

ENGLISH

FRANÇAIS

PORTUGUÊS ESPAÑOL

Storing the station names

You can assign a name to each radio station and store it in memory. As many as 30 station names can be stored com- posed with 8 characters each.

Storing the station names

1. Tune in a station whose name you want to store.

2. Press the DISP for more than 2 seconds.

The “ NAME EDT ” will light then the “ _ _ _ _ _ _ _ _ ” on the display window. The first “ _ ” flashes.

3. Enter the characters.

A. Rotate the dial in a clockwise direction to select the desired characters.

( A ➜ B ➜ C ➜ . . . Z ➜ < ➜ > ➜ ∗ ➜ + ➜ ➜ − ➜ ′ ➜ /

➜0➜1➜2➜3...9➜“ ”Space )′

B. Press the to move the flashing cursor to the

next position. If you press , the flashing cur- sor moves to the left.

C.Repeat steps A. and B. to complete entering the entire name 8 characters max.

	Tip
	To erase/correct a name, press the DISP		for more than 2
	seconds to clear the character and re-enter.
4.	Press the	MUTE / SENS to store the station name.
5.	The station name flashes.
	To return to the normal radio reception, Press			DISP .
Erasing the station names
1.	Tune in any station and press the DISP		for more than 2
2.	seconds.
	Press the	MUTE / SENS .
3.	The station name or “ _ _ _ _ _ _ _ _ ” flashing.
	Rotate the dial to select the name of the station that you
	want to erase. To erase all the names of the stations, dis-
4.	play “ ✳ALL DEL ”.
	Press the	DISP for more than 2 seconds.
5.	Repeat steps 3. and 4. if you want to erase other names.
	To return to the normal radio reception, Press			DISP .

Direct Access to Memorized Stations via Station call

You can search for the memorized AM & FM station names in the memory.

1.	Press the	DISP to display the “ STN CALL ” on the dis-
2.	play window.
	Rotate the large dial to select the desired station name.
3.	Press the	MUTE / SENS to tune in the desired station.

Level Meter selection

The meter displays can be selected from four types.

You can select :

•METER 1 : The level meter goes upward.

•METER 2 : Only the very top segment lights.

•METER 3 : The remaining segments light. (opposite of METER 2)

•METER 4 : The level meter goes up and down dividing from the center segment.

•METER 0 : No meter is indicated.

1. Press the DISP to display the “ METER 1 ” on the display window.

2. Rotate the dial in a clockwise direction to select the de- sired meter indication.

METER 1 ➜ METER 2 ➜ METER 3 ➜ METER 4 ➜ ME- TER 0

L-ch Level meter R-ch Level meter

Level Meter Sensitivity selection

The sensitivity of the level meter display can be switched.

You can select :

•LEVEL 1 : Normal sensitivity.

•LEVEL 2 : High sensitivity.

1. Press the DISP to display the “ LEVEL 1 ” on the display window.

2. Rotate the dial to select the desired meter sensitivity.

LEVEL 1

LEVEL 2

Enhancing the bass sound

For extended bass centered @ 72Hz, Blaupunkt’s X-Bass function can be set for either each band and CD mode.

You can select :

•X-Bass 1 : Enhanced BASS level (low).

•X-Bass 2 : Enhanced BASS level (Middle).

•X-Bass 3 : Enhanced BASS level (High).

•X-Bass 4 : Enhanced BASS level (Very high).

•X-Bass 0 : No BASS enhanced.

Press the XBASS repeatedly to select the bass sound.

“ ” appears on the display window.

Each time you press XBASS , the current mode appears on the display window and the mode change as follows:

XBASS 0 ➜ XBASS 1 ➜ XBASS 2 ➜ XBASS 3 ➜ XBASS 4

Note

Reduce XBASS levels if your combination of speakers and add- on amplifiers sound distorted at the preferred sound level.

E-6