Blaupunkt Bahamas MP34 installation instructions Radio Mode, Radio mode

RADIO MODE

Radio mode

Switching to radio mode

If you are listening to CD/MP3, CD changer or AUX mode,

➮press the BND-TS4button

or

➮keep pressing the SRC button : until “FM” or “AM” (“MW”) appears in the display.

Setting the tuner

In order to guarantee the perfect func- tioning of the radio element, the unit must be set for the region in which you are located. You can choose between Europe (EUROPE), America (USA), Thailand (THAI) and South America (S-AMERICA). The tuner comes from the factory set for the region in which the unit was sold. Should you encounter problems with radio reception, please check this setting.

This set of instructions refers to the “USA” setting.

➮Press the MENU button 8.

➮Press the fi button 7repeatedly until “TUNER” appears on the display.

➮Keep pressing the @ or # button 7 until the desired region appears in the display.

When you have finished making your changes,

➮press the MENU button 8twice.

Selecting the frequency range/ memory

This unit can receive programmes broadcast over the FM and AM frequency ranges. There are three preset memory levels for the FM range and one for the AM range. Six stations can be stored on each memory level.

Selecting the FM memory level or the AM frequency range respectively

➮Keep pressing the BND-TSbutton 4 to switch between the FM memory levels (FM1, FM2 and FMT) and the AM frequency range respectively.

Tuning into a station

There are various ways of tuning into a station.

Automatic seek tuning

➮Press the fi or % button 7.

The unit tunes into the next receivable station.

Setting the sensitivity for station seek tuning

You can configure the radio to only tune into stations with a strong reception or to also tune into those with a weak reception.

➮Press the MENU button 8.

➮Keep pressing the fi or % button 7 until “SENS HI” or “SENS LO” appears in the display.

ENGLISH

11