Blaupunkt BPV 655 manual Radio Reception

MUTE / SENS

Radio Reception

Seek Tuning

1. Press the BAND to select the desired AM or FM band.

FM I ➜ FM II ➜ FM III ➜ AM I ➜ AM II (FM III & AM II are Travel Store bands.)

2. Rotate the TUN/TRK dial to tune in stations. Tuning au- tomatically stops at a broadcasting frequency.

When tuned in to FM stereo broadcasting stations, the

“ ” stereo signal indicator will appear on the display window.

	: Lower Frequency.
	: Higher Frequency.
Manual Tuning
1.	Press the BAND to select the desired AM or FM band.
2.	Rotate and hold the TUN/TRK dial for more than 0.5 sec-
	ond to activate the manual tuning mode.

“MAN ” indicator will appear on the display window. Rotate again to tune in to stations.

After 4 seconds of completing Manual Tuning, the tuning control will revert to the Seek Tuning mode.

Scan Tuning

1.	Press the	BAND	to select the desired AM or FM band.
2.	Hold the	SC/PS	pressed for less than 2 seconds.
	The unit will scan the selected band for stations and the
	unit will stop at each station for 8 seconds, before con-
	tinuing to the next station.
	Press the	SC/PS	again to stop Scan Tuning and remain
	this on the selected frequency.
Preset Scan Tuning
1.	Press the	BAND	to select the desired AM or FM band.
2.	Hold the	SC/PS	pressed for more than 2 seconds.

The unit will scan preset memory for the 12 stations from the AM I/AM II band or the 18 stations from the FM I/FM II/FM III bands. The unit will stop at each preset station for 8 seconds, before continuing to the next preset sta- tion.

Press the SC/PS again to stop Preset Scan Tuning and remain this on the selected frequency.

Memorizing Stations Automatically (Travel Store)

1.	Press the	BAND	to select the desired AM or FM band.
2.	Hold the	BAND	pressed for longer than 2 seconds.

Up to 6 stations with strong signals will be automatically stored in preset memory for the selected band.

If the radio is in FM I or FM II, it switches to FM III. If the radio is in AM I, it switches to AM II.

Note

This function is available for FM III and AM II.

Memorizing Only the Desired Stations
You can store up to 6 stations on each band (18 for FM I, FM				ENGLISH
II and FM III, 12 for AM I and AM II) in the order of your
choice.
1.	Press the BAND to select the desired band.
2.	Rotate the TUN/TRK dial to tune in stations.
3.	Press and hold the desired preset memory button 1		-
	6	for about 2 seconds until the frequency indicator
	flashes twice.
	The number of the pressed preset memory button ap-
	pears on the display window.

Note

If when you store another station on the same preset number button, the previously stored station is replaced with new one.

Receiving the Memorized Stations

1.	Press the	BAND	to select the desired AM or FM band.
2.	Press the	1 -	6 momentarily.

Local/Distant (LO/DX) Selection

This feature is used to select the signal strength at which the radio will stop during Seek Tuning.

Press the for more than 2 seconds to select the Local setting and only strong (local) stations will be received. The “ lo ” indicator appears on the display window.

Pressing for more than 2 seconds again will select the Dis- tant setting and the radio will stop at a wider range of signals, including weaker more distant stations. The “ lo ” indicator will go out on the display window. DX is the suggested default setting.

E-5

BPV655(EN)_body 5 1/10/02, 5:50 PM