Blaupunkt C51 Changing the Display, Resetting the Tape Counter, Fast Winding, Pausing During Play

The track that is currently being sam- pled will continue to be played.

Note:

●The duration of the samples can be adjusted. Refer to the section on “Adjusting the Sample Time” in the “Radio Operation” section.

●There must be a pause of at least three seconds between each of the tracks on the cassette in order to use the S-CPS, RPT and SCAN functions.

Changing the Display

In order to change between the display of tape direction, tape counter, elapsed play time, remaining play time or clock time:

➮hold down the / DIS button, 7, one or more times for longer than two seconds, until the display you want appears.

Resetting the Tape Counter

In order to reset the tape counter,

➮press button, 5 MIX, >.

Fast Winding

Fast forward

➮Press the button, :. “FORWARD” appears in the display.

Fast rewind

➮Press the button, :. “REWIND” appears in the display.

CASSETTE OPERATION

Stopping the fast wind
➮ Press the OK button, ;.
Play continues.
Note:
● While the tape is being fast wound,	ENGLISH
tion that was most recently tuned
it is possible to hear the radio sta-

in. This requires the “Radio moni- tor” function to be switched on.

Pausing During Play

➮In order to interrupt the playing of a

tape, press button 3 , >.

Play is interrupted, and “CAS PAUSE” appears on the display.

➮ Press button 3 , >, again to continue after the pause.

Switching the Radio Monitor On and Off

➮Press the MENU button, 8.

➮ Press the or button, :, as often as is necessary for “RM ON” or “RM OFF” to appear in the dis- play.

➮ Press the or button, :, in or- der to switch the radio monitor on or off.

➮Press the MENU button, 8, or OK, ;.

45