Setting the Station
There are a number of ways to set the station.
Automatic station search
➮Press the or button, :.
The next station that can be received is tuned in.
Manual station tuning
You can also tune to the station manu- ally.
➮Press the or button, :.
Note:
●Manual station tuning is only possi- ble if the RDS convenience func- tion is deactivated.
Browsing a chain of stations (FM only)
If a station is providing several programs it is possible to browse through this “chain” of stations.
➮Press the or button, :, in or- der to change to the next link in the station chain.
Note:
●In order to use this function, the RDS convenience function must be active.
You can only change in this way to a station that you have already received at least once. Use the Scan or Travel- store function for this purpose.
RADIO OPERATION
Adjusting the Sensitivity of the Station Search
You can choose whether to search only for stations with strong signals, or wheth- er weak stations should be included.
➮ Press the or button, :, as | ENGLISH | ||||
➮ Press the MENU button, 8. |
| ||||
|
|
|
|
|
|
often as is necessary for “SENS” to |
| ||||
appear in the display. |
|
➮ Press the button, :.
The current value of the sensitivity is shown on the display. “SENS HI6” indi- cates maximum sensitivity, and “SENS LO1” the lowest. If “SENS LO” is cho- sen, lo appears in the display.
➮Adjust the desired sensitivity with
the or key, :.
➮When the setting process is com- plete, press the MENU button, 8, or OK, ;.
Saving a Station
Saving a Station Manually
➮Choose the desired memory level from FM1, FM2, FMT or one of the other wavebands, MW or LW.
➮Tune to the station you want.
➮Choose one of the station buttons 1 - 6, >, on which you want to store the station, and hold it pressed for longer than two sec- onds.
39