General Operations
Volume Level Control and Memory
Rotate the dial to set the memory for the volume level which will be recalled when the unit is turned on.
1. Adjust the volume level. Spinning or fast rotation of the
dial knob will increase the number of turns needed to reach max. volume.
Volume down
Volume up
4. Press the DISP to display “ CLOCK 12 ”.
5. Rotate the dial to select the 12 or
CLOCK 12 ï CLOCK 24
6. Press the DISP momentarily. The clock is activated.
Tip
Frequency Display is initially set as the Display Priority, and Station Name (“NO NAME”) is set to “Temporary”.
Adjusting the Sound Characteristics
1. Press the AUD | to select the desired adjustment mode. |
BASS 0 ➜ TREBLE 0 ➜ LOUD OFF(LOUDNESS) | |
➜ | ➜ |
2. Hold the PWR pressed for more than 2 seconds.
The unit will turn off and the selected max.
Note
If the unit is turned off with the volume lower than the memory setting, the unit will return to the lower setting when turned
Ignition-off Clock Recall
The display will illuminate showing the time and then auto- matically shut off after 5 seconds.
Press the DISP while the ignition switch is in the “ OFF ” posi- tion.
R0 F0(FADER) | ➜ |
2. Rotate the dial to adjust Adjust within 3 seconds After 3 seconds, the dial Use the following tables tings in each mode.
L0 R0(BALANCE)
the selected item. after selecting the item. functions as volume control.
as a guide for adjusting the set-
back on.
Muting the sound
Press MUTE / SENS .
“ MUTE ” apeares on the display window.
To restore the previous volume level, press MUTE / SENS again.
Setting the Clock
1. | Turn the ignition key to the ON position. | ||
2. | Press the | PWR | to turn on the unit. |
3. | Press the | DISP | to display “ CLK ADJ ”. |
A. Press the MUTE / SENS within 3 seconds to flash the “ 12 ” (HOUR ADJ).
B. Rotate the dial to set the hour digit.
C. Press the 
to flash the “ 00 ” (MIN ADJ). D. Rotate the dial to set the minute digit.
Mode Selector
Each time the DISP is pressed, the display window will change over as shown below;
Priority ➜ STN CALL ➜ LEVEL 1 | ➜ Temporary ( NO NAME ) | |
➜ |
| ➜ |
CLOCK 12 | ➜ CLK ADJ | ➜ METER 1 |
Display priority setting
Display Priority can be set for the following two items;
• Frequency and Station Name.
Example
To set Station Name to the Display Priority.
1. | Press the | DISP | three times, and the temporary display |
2. | appears in the display window. | ||
Hold the | DISP | pressed for more than 2 seconds. | |
“NO NAME” or any station name blinks once to indicate that Station Name is selected for the Display Priority. After 5 seconds, the display mode will automatically re- turn to the Display Priority showing either “NO NAME” or
the station name.
BASS | BASS | BASS +5 |
|
|
|
TREBLE | TREBLE | TREBLE +5 |
|
|
|
LOUD | LOUD OFF | LOUD ON |
|
|
|
BALANCE | L9 R0(Full left) | L0 R9(Full right) |
|
|
|
FADER | R9 F0(Full rear) | R0 F9(Full front) |
|
|
|
