MUTE / SENS

Storing the station names

You can assign a name to each radio station and store it in memory. As many as 30 station names can be stored, com- posed with 8 characters each.

Storing the station names

1. Tune in a station whose name you want to store.

2. Press the DISP for more than 2 seconds.

The “ NAME EDT ” will light then the “ _ _ _ _ _ _ _ _ ” on the display window. The first “ _ ” flashes.

3. Enter the characters.

A. Rotate the dial in a clockwise direction to select the desired characters.

( A B C . . . Z < > + / 0123...9“ ”Space )

B. Press the

TUN/ TRK

to move the flashing cursor to

 

the next position. If you press

TUN/ TRK

, the flash-

 

ing cursor moves to the left.

 

 

C. Repeat steps A and B to complete entering the entire name 8 characters max.

Tip

To erase/correct a name, press the DISP for more than 2 seconds to clear the character and re-enter.

4.

Press the

MUTE / SENS to store the station name.

 

The station name flashes.

5.

To return to the normal radio reception, Press DISP .

Erasing the station names

1.

Tune in any station and press the DISP for more than 2

 

seconds.

 

2.

Press the

MUTE / SENS .

 

The station name or “ _ _ _ _ _ _ _ _ ” is now flashing.

3.

Rotate the dial to select the name of the station that you

 

want to erase. To erase all the name of the station, dis-

 

play “ ALL DEL ”.

4.

Press the

DISP for more than 2 seconds.

 

Repeat steps 3. and 4. if you want to erase other names.

5.

To return to the normal radio reception, Press DISP .

Direct Access to Memorized Stations via

Station Call

You can search for the memorized AM & FM station names in the memory.

1. Press the DISP to display the “ STN CALL ” on the dis- play window.

2. Rotate the large dial to select the desired station name.

3. Press the to tune in the desired station.

Level Meter selection

The meter displays can be selected from four types.

You can select :

METER 1 : Type that the level meter goes upward.

METER 2 : Type that only the very top segment lights.

METER 3 : Type that the remaining segments light. (op- posite of METER 2)

METER 4 : Type that the level meter goes up and down dividing from the center segment.

METER 0 : No meter is indicated.

1.

Press the DISP to display the “ METER 1 ” on the display

 

window.

2.

Rotate the dial to select the desired meter indication.

 

METER 1 METER 2 METER 3 METER 4 ME-

 

TER 0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

L-ch Level meter

R-ch Level meter

E-5

Level Meter Sensitivity selection

The sensitivity of the level meter display can be switched.

You can select :

LEVEL 1 : Normal sensitivity

LEVEL 2 : High sensitivity

1.

Press the DISP to display the “ LEVEL 1 ” on the display

 

window.

2.

Rotate the dial to select the desired meter sensitivity.

 

LEVEL 1 ï LEVEL 2

Enhancing the bass sound

For extended bass centered @ 72Hz, the XBASS function can be set for either each band and CD mode.

You can select :

XBASS 1 : Enhanced BASS level (low)

XBASS 2 : Enhanced BASS level (Middle)

XBASS 3 : Enhanced BASS level (High)

XBASS 4 : Enhanced BASS level (Very high)

XBASS 0 : No BASS enhanced/off

Press the XBASS repeatedly to select the bass sound. “ ” appears on the display window.

Each time you press XBASS , the current mode appears on the display window and then the mode change as follows: XBASS 0 XBASS 1 XBASS 2 XBASS 3 XBASS 4

Page 6
Image 6
Blaupunkt CD169 Storing the station names, Direct Access to Memorized Stations via Station Call, Level Meter selection