Blaupunkt CD74 Switching the equalizer on/off, Automatically calibrating the equalizer, Equalizer

Models: CD74

1 30
Download 30 pages 49.81 Kb
Page 25
Image 25
Switching the equalizer on/off

EQUALIZER

Switching the equalizer on/off

To switch the equalizer on/off,

press the DEQ+ button 5.

The equalizer menu is displayed.

To activate the equalizer,

Press the softkey 4 assigned to the “USER”or “PRE”display item and select an equalizer.

To deactivate the equalizer,

Press the softkey 4 assigned to the “OFF”display item.

Automatically calibrating the equalizer

You can electronically calibrate and store values for three different situations.

EQ 1 for the driver only

EQ 2 for the driver and front passenger

EQ 3 for the front and rear occupants

Hold the calibration microphone (avail- able as an accessory) in the appropri- ate position whilst the calibration is tak- ing place.

The position of the calibration micro- phone for situation 1 (e.g. for the driver alone) is at the height of the driver's head.

For situation 2, the calibration micro- phone is between the driver and pas- senger.

For Situation 3, it is in the middle of the vehicle interior (left/right, front/back).

Really quiet surroundings are required for the calibration. Any extraneous noise will distort the measured values.

Note:

The sound radiating from the loud- speakers must not be obstructed by any objects. All the loudspeakers must be connected. The microphone must be connected to the unit.

To calibrate an equalizer,

Press the DEQ+ button 5.

Press the softkey 4 assigned to the “USER”display item.

Press the softkey 4 assigned to the display item of the equalizer that you want to configure.

Press the softkey 4 assigned to the “AUTO”display item.

You will hear a test sound, and calibra- tion takes place.

Proceed as described for all the equalizers.

Selecting an equalizer

After calibration has taken place or you have finished making manual adjust- ments,

press the DEQ+ button 5.

Press the softkey 4 assigned to the “USER”display item.

Select one of the equalizers “EQ1”,

“EQ2”or “EQ3”using the corre- sponding softkeys 4.

Press the joystick OK 7 or the DEQ+ button 5 to close the menu.

The settings are saved.

ENGLISH FRANÇAIS ESPAÑOL PORTUGUÊS

25

Page 25
Image 25
Blaupunkt CD74 Switching the equalizer on/off, Automatically calibrating the equalizer, Selecting an equalizer, Equalizer