THEFT PROTECTION | SWITCHING ON/OFF |
➮Press the 
button 2.
The control panel latch mechanism opens.
➮First, pull the control panel straight off the unit and then out towards the left. (For further details, read the safety information in the “Notes and accessories”chapter)!
●The unit switches off after the con- trol panel is removed.
●All the current settings are saved.
●Any CD already inserted in the unit remains there.
Attaching the control panel
➮Slide the control panel from left to right into the unit’s guide.
➮Press the
Note:
●When attaching the control panel, make sure you do not press the display.
If the device was still switched on when you removed the control panel, it will automatically switch on again with the last settings activated when the panel is replaced.
Switching on/off
There are various ways of switching the unit on/off.
Switching on/off using button 1
➮To switch the unit on, press button 1 until you feel the latch open and the button pushes out.
The unit switches on.
➮To switch the unit off, press button 1 until you feel it click into place.
The unit switches off.
Switching on/off using the vehicle ignition
If the device is correctly connected to the vehicle’s ignition and the unit was not switched off using button 1, it will switch on/off simultaneously with the ignition.
You can switch the unit on even if the ignition is off.
➮To do so, press button 1 so that you feel it unlatch and push out.
Note:
To protect the vehicle battery, the unit will switch off automatically after one hour if the ignition is off.
8
