CD PLAYER OPERATION
Stopping the SCAN function, continue listening to the current track
➮To stop the SCAN function, press OK ;.
The track currently scanned will contin- ue playing.
Switching the display mode
➮To switch the display between the track number and time or the track
number and elapsed playing time, press 
/ DIS 7 for longer than two seconds once or repeatedly as required.
Repeating individual tracks (REPEAT)
➮To repeat the track currently play- ing, press 4 RPT >.
“REPEAT TRCK” will appear briefly in the display, the RPT symbol will light up in the display. The track will continue to repeat until RPT is deactivated.
Stopping the REPEAT function
➮If you want to stop the REPEAT function, press 4 RPT > again.
“REPEAT OFF” will appear briefly in the display and the RPT symbol will no long- er light up. CD playback will resume normally.
Interrupting playback (PAUSE)
➮Press 3 
>.
“PAUSE” will appear in the display.
Stopping PAUSE
➮Press 3 
> during the pause. Playback will resume.
Traffic radio information during CD playback
➮If you would like to receive traffic
radio information while listening to your CD player, press TRAF ?.
The traffic congestion symbol will light up in the display to indicate that priority for traffic radio announcements has been activated. For more information, please refer to the section on “Traffic information reception”.
38
