![](/images/new-backgrounds/1132283/13228337x1.webp)
CD CHANGER OPERATION | CLOCK |
Stopping the MIX function
➮To stop the MIX function, press 5 MIX >repeatedly until “MIX OFF” appears briefly in the display and MIX no longer lights up.
Scanning all of the tracks on all of the CDs (SCAN)
➮To scan all of the tracks on all of
the CDs in ascending order, press OK ;for longer than two sec- onds.
“SCAN” will appear in the display.
Stopping the SCAN function
➮To stop the SCAN function, press OK ;briefly.
The track currently scanned will contin- ue playing.
CLOCK
Displaying the clock briefly
In the radio mode
➮To display the time briefly, press / DIS 7 briefly.
In CD player and CD changer mode
➮To switch between the display of
the CD number, playing time and the time, press / DIS 7 once or repeatedly.
Altering the permanent display
➮To make the time or another dis-
play as described above perma- nent, press and hold / DIS 7 until the desired information ap- pears in the display.
Note:
It is possible to adjust the scan time. For more information, read the section on “Adjusting the scan time” in the chapter on “Radio Operation”.
Interrupting playback (PAUSE)
➮Press 3 >.
“PAUSE” will appear in the display.
Stopping PAUSE
➮Press 3 > during the pause. Playback will resume.
Setting the time
➮To set the time, press MENU 8. “MENU” will appear in the display.
➮Press :until “CLOCKSET” ap- pears in the display.
➮Press:.
The time will appear in the display. The minutes will flash and can be altered.
➮Press or
:to alter the min- utes.
➮Once you have altered the minutes, press :. The hours will begin to flash.
➮Press or
:to alter the hours.
➮Once you have set the time, press MENU 8or OK ;twice.
40