CD mode
The drive draws in the CD automatically.
You must not hinder or assist the drive as it draws in the CD.
Gently close the control panel whilst exerting a little pressure until you feel it click into place.
The CD starts playing.
Note:
If the vehicle ignition was switched off prior to inserting the CD, you must switch the device on firstwith the but- ton 1to start the playback.
If a CD is already inserted in the drive,
press the SOURCE button 4 repeat- edly until "CD" appears on the display.
Playback begins from the point at which it was last interrupted.
Selecting tracks
Press one of the arrow buttons : to select the next or previous track.
If you press the 
or 
button :once, the player will play the current track again from the beginning.
Fast track selection
To quickly select tracks backwards or for- wards,
press and hold down the 
or 
button : until fast track selection backwards / forwards begins.
Fast searching (audible)
To fast search backwards or forwards,
press and hold down the 
or 
button :until fast searching backwards / for- wards begins.
Random track play (MIX)
Press the 5 MIX button ;.
"MIX CD" appears briefly on the display and the MIX symbol is displayed. The next ran- domly selected track will then be played.
Cancelling MIX
Press the 5 MIX button ;again.
"MIX OFF" appears briefly on the display and the MIX symbol disappears.
Scanning tracks (SCAN)
You can scan (briefly play) all the tracks on the CD.
Press the MENU button 9 for longer than two seconds.
The next track will then be scanned.
Note:
You can set the scanning time. For further information, please read the section entitled "Setting the scanning time" in the "Radio mode" chapter.
Cancelling Scan and continuing listening to a track
To end the scanning process,
press the MENU button 9.
The currently scanned track will then con- tinue to be played normally.
ENGLISH
47
