Radio mode
Switching REGIONAL on/off
Press the MENU button 9.
Press the 
or 
button :repeated- ly until "REG" appears on the display. "OFF" or "ON" is displayed alongside "REG".
To switch REGIONAL on/off,
press the 
or 
button :.
Press the MENU button 9.
Switching the RDS function on/off
To switch the RDS functions AF and REGIONAL on or off,
press and hold down the TRA•RDS but- ton 7for longer than two seconds.
The RDS functions are active when RDS lights up in the display.
Selecting the waveband/memory bank
This device can receive programmes broad- cast over the FM frequency range as well as the MW and LW (AM) wavebands. There are three memory banks available for the FM waveband (FM1, FM2 and FMT) and one for each of the MW and LW wavebands.
Six stations can be stored in each memory bank.
To switch between the FM memory banks (FM1, FM2 and FMT) and the MW and LW wavebands,
briefly press the BND•TS button 6.
Tuning into a station
There are various ways of tuning into a sta- tion.
Automatic station seek tuning
Press the 
or 
button :.
The radio tunes into the next receivable sta- tion.
Tuning into stations manually
You can also tune into stations manually.
Note:
You can only tune into stations manu- ally if the convenient RDS function is deactivated.
To change the set frequency in small incre- ments,
briefly press the 
or 
button :. To change the set frequency quickly,
press and hold down the 
or 
button :for a longer period of time.
ENGLISH
41
