Blaupunkt MP36 Detaching the control panel, Attaching the control panel,  Press the button

Models: MP36

1 33
Download 33 pages 28.99 Kb
Page 8
Image 8

Control panel

Detaching the control panel

Press the button 2.

The control panel opens out towards you.

Hold the control panel by its right side and then pull the control panel straight out of the bracket.

Notes:

The device is switched off after a time preset by you. For instructions, please read the section "Switch-off time (OFF TIMER)" in this chapter.

All the current settings are saved.

Any CD already inserted in the device remains there.

Attaching the control panel

Hold the control panel approximately at a right angle to the device.

Slide the control panel into the de- vice’s guides that are positioned on the left and right at the lower edge of the housing. Push the control panel care- fully into the bracket until it clicks into place.

Carefully flipup the control panel until it clicks into place.

2.

1.

If the device was still switched on when you detached the control panel, it will automati- cally switch on with the last setting activat- ed (radio, CD, CD changer or AUX) when the panel is replaced.

Switch-off time (OFF TIMER)

After opening the control panel, the device is switched off after an adjustable time. You can set this time from 0 to 30 seconds.

Press the MENU button 9.

Press the or button :repeatedly until the displays shows "OFF TIMER".

Adjust the time with the buttons

:.

When you have finished making your chang- es,

press the MENU button twice 9.

Note:

If you set the switch-off time to 0 sec- onds, the device is switched off imme- diately after opening the control panel.

ENGLISH

37

Page 8
Image 8
Blaupunkt MP36 Detaching the control panel, Attaching the control panel, Switch-off time OFF Timer,  Press the button