SPEECH 1:
Linear reproduction (bass, treble and Loudness set to “0”)
SPEECH
Different settings for vol- ume, bass and treble with the Loudness being switched off.
Try out which SPEECH set- ting you like most.
BEEP Acknowledgement tone for all functions which require a button to be pressed for more than one second.
The volume can be adjusted from between 0 to 9. (0 = off).
ANGLE Use this setting to alter the viewing angle to your liking from
BRIGHT You can adjust the display brightness from between 1 to 16. You can also select different values for day and night.
Selecting the night bright- ness:
Switch on the vehicle lights and programme the bright- ness value. The car radio’s lighting connector must be hooked up to the vehicle’s electric system for this to function properly.
COLOUR
(Variocolour) For gradually matching the radio illumination with the dashboard lighting.
green | light orange | red |
LED ON Here you can choose be- tween LED ON or LED OFF. With LED ON, the KeyCard tongue will flash for extra
LEARN KC To “train” a second KeyCard.
Please read the information in chapter “KeyCard theft protection system - “Train- ing” a second KeyCard”.
READ KC To read out the KeyCard data.
The card supplied with the radio is used to display the model name, type number (7 6..) and the serial number.
With the extra card it is pos- sible to display the Short Additional Memory (S.A.M.) data entered by your spe- cialised dealer. See chapter “Short Additional Memory S.A.M.”.
If you remove the KeyCard during the reading process, “READ KC” will show on the display panel. The unit con- tinues to play but does not accept any operations ex- cept from being switched off.
PTY LANG To select the programme type language: DEUTSCH or ENGLISH
SCANTIME Use this function to set the scan time for the radio or CD player from between five and 30 seconds.
DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS
59
