Automatic seek tuning
Up
Down
<</ >> Up/down in short intervals (on FM only if "AF" is switched off)
Manual tuning with <<>>
You can also tune into a station manually.
Important:
AF and PTY must be switched off (i.e. the symbols do not light up in the display).
If necessary, deactivate these functions:
• Press AF·TA or PTY.
Manual tuning:
•Press << >>; the frequency will change in short intervals in the corresponding
direction.
If you hold << >> pressed to the left or the right on the rocker switch, the frequency scan will speed up.
Scrolling through the broadcast networks (FM only)
You can use the <<>> buttons to tune into stations in your reception area.
If it is possible to receive several program- mes in the same broadcast network, you can scroll through them in the forwards di- rection by pressing >>, or backwards using the << button, e.g. NDR 1, 2, 3, 4.
For this to work properly you must have al- ready tuned into the stations at least once and "AF" must be active (lights up in the display).
To do this, you can start the Travelstore seek operation:
•Press BA/TS for 2 seconds; the system will start to run through the frequency band.
If "AF" is not lit up,
•Press AF·TA until a beep is emitted. It is now possible to select stations using <<>>.
Switching between the memory banks (FM)
You can switch between the memory banks 1, 2 and T in order to store stations and recall them later.
The currently selected memory bank will appear in the display.
•Press the BA/TS button as many times as necessary until the desired memory bank lights up in the display.
Storing stations
On FM, you can store six stations on the preset buttons 1, 2, 3, 4, 5, 6 for each of the memory banks (1, 2, T).
On MW/LW, you can also store six stations each.
•Select the appropriate waveband by pressing BA/TS.
•Tune into a station with the rocker switch (either automatically 
/
or manually <</>>).
•Press the desired preset button until the radio resumes play after the muting (takes approx. 2 seconds) or until you
hear a beep.
Now the station has been stored.
The display will indicate which preset but- ton is currently activated.
36
