Quick reference
1REL
To release the detachable panel (theft protection).
Press this knob and remove the re- lease panel.
2ON - Power on/off
Press this button to turn the unit on. It will play at the preset volume.
If you press this button briefly while listening to the radio, the volume will mute instantly
(MUTE).
Cancel this function by pressing the ON button again. You can adjust the mute volume (refer
to the section on DSC programming). Press the button for about 2 seconds to turn the unit off.
Switching on/off with the ignition: If the unit has been connected as des- cribed in the instructions, it can also be turned on and
off with the vehicle ignition.
Press the ON button to keep on ope- rating the unit when the ignition is switched off.
To prevent the battery from running down, the system will turn off automa- tically after one hour of playback.
3Volume knob
Turn the knob to adjust the volume.
4DSC Direct Software Control
This feature allows you to adjust the basic programmable settings.
For further information, refer to the section on DSC programming.
5Cassette slot
Insert the tape into the slot with the open side showing to the right. The tape will be played in direction "TAPE 1".
6Display
The display indicates all settings, ope- rating modes and functions.
7
This button switches tape playback between Tape 1 and Tape 2 (different sides of the tape).
8 
Eject
Press this button to eject the cassette.
9Rocker switch
Radio mode
/ 
Seek tuning
Up
Down
<</ >> Up/down in short intervals (for FM only if "AF" is off)
For FM only:
<</ >> Scrolls through the broad cast networks, if AF is on. Example: NDR 1, 2, 4,
Cassette mode
/ 
S-CPS function
Up
Down
Press repeatedly to skip over the cor- responding number of songs. Press the button indicating the opposite di- rection or << >> to stop the function.
28
