Traffic programme station reception with RDS-EON
The abbreviation "EON" stands for Enhan- ced Other Networks, which means that in- formation is exchanged within a radio net- work.
Many FM radio stations provide their ser- vice area with traffic messages at regular intervals.
Along with their programmes, all traffic pro- gramme stations transmit a special carrier signal, which is decoded by your car radio. If this signal is identified, "TP" will appear in the display (Traffic Programme).
In addition to these, there are also stations which do not actually transmit traffic infor- mation themselves, but by using
If you want to have the priority for traffic announcements activated while listening to one of these stations (e.g. NDR3), "TA" must appear on the display panel.
If a traffic announcement is broadcast, the radio will automatically switch to the linked traffic programme station (in this case, NDR2) for the duration of the message and return to the original programme (NDR3) afterwards.
Traffic announcement priority on/off
If the priority for traffic announcement pro- grammes is activated, "TA" will light up in the display.
To switch the priority on or off:
• Press the AF·TA button.
If you press AF·TA while a message is being broadcast, this message will be in- terrupted.
The unit will then switch back to the pre- vious mode. The priority for other traffic messages remains active.
Please note that several buttons have no function while a traffic announcement is broadcast.
Warning beep
If you leave the reception area of the traffic programme station currently tuned into, you will hear a warning beep after approx. 30 seconds.
This warning will also be emitted if you press a preset button for a station which does not send the traffic programme signal (TP).
Switching the warning beep off
a)Tune into another station offering traffic information:
•Press the rocker switch or
•press a preset button which has a traffic programme station allocated to it.
Alternatively:
b)Switch off the priority for traffic an- nouncements:
•Press TA.
"TA" will disappear from the display.
Automatic seek tuning start
(Cassette and CD changer mode)
If you leave the reception area for the traf- fic programme station you have tuned into while you are listening to a cassette or CD, the system will automatically start searching for a new traffic programme.
If no such station is found within approx. 30 seconds, a warning beep will sound eve- ry 30 seconds. To switch the warning beep off, press TA button.
Adjusting the volume for traffic announcements and the warning beep
Although this volume was preset at the fac- tory, you can use the DSC function to alter the setting (see "DSC programming - TA VOL").
40
