by” and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.
MTL
Switch on the MTL function to select the best equalisation response when using metal or CrO2 tapes. “MTL” will light up in the display.

PROG selector

(To change the tape direction during cassette playback)

• Press FR and FF simultaneously.

At the end of a tape side, the mechanism changes directions automatically to play the other side (Autoreverse). The display shows

“TR1-PLAY” for track (side) 1 or A or “TR2-To switch Dolby B-NR and MTL on/off:

PLAY” for track 2 or B.• Press B/MTL repeatedly until the desi- red setting appears in the display.

To switch the function on/off:

Press CPS.

“CPS ON” or “CPS OFF” will light up in the display for approximately 2 seconds.

With “CPS ON”:

Fully depress the FF button -

The tape is fast forwarded to the next title.

Notice:

If there is too much tension on the tape during playback, the set may switch over by itself before having reached the end of the tape side. In this case check the condition of the cassette tape. Sometimes it helps to rewind it completely.

Dolby B-NR* and

tape equalisation with B/MTL

Dolby B-NR*

With this unit you can play back tapes recor- ded with Dolby-B or without noise reduction. Cassette tapes recorded with Dolby NR* stand out by their much lower tape hiss and the improved dynamics.

If Dolby B-NR is switched on, “B” will light up in the display.

*Noise Reduction system manufactured under license from Dolby Laboratories Licensing Corporation. “Dol-

The system enables the following settings:

MTL tape

The display shows

with Dolby B-NR

MTL

B

without Dolby B-NR

MTL

Normal tape

 

 

with Dolby B-NR

B

without Dolby B-NR

Skipping/repeating titles with CPS

CPS stands for Cassette Program Search. This function allows you to skip a cassette title or listen to it once again.

Fully depress the FR button -

The tape is rewound to the beginning of the current title, provided that it has already been played for more than 8 seconds. Otherwise the tape will be rewound to the beginning of the previous title.

Switching the audio source

with SRC (Source)

Using this function you can switch between radio, tape and CD changer (optional) opera- tion or playback of any other connected de- vice.

To switch over:

Press the SRC button.

30

Page 14
Image 14
Blaupunkt RCM 85 Prog selector, Dolby B-NR* Tape equalisation with B/MTL, Skipping/repeating titles with CPS