Blaupunkt RCM 85 operating instructions Fast winding/PROG button, = Sc/Mix, SRC Source

Tape operation:

TR1--PLAY - Side 1 (or 2)

MTL	- Metal
B	- Dolby B-NR

CD changer operation (optional):

CD 05 - Disc number

T 02 - Title number

<Fast winding/PROG button

To switch to the other side of the cassette tape:

Press both buttons simultaneously.

The display shows TR1-PLAY or TR2-PLAY.

FR : Fast rewind; stop by pressing FF.

FF : Fast forward; stop by pressing FR.

=SC/MIX

Radio operation

Scan (sampling all stations to be recei- ved): Press SC/MIX briefly.

Preset Scan (sampling all stations stored on the preset buttons): Press SC/MIX for approximately 2 seconds.

Changer operation (optional)

See chapter “CD changer control”.

>SRC (Source)

To switch between the available audio sources, e.g. tape, radio, CD changer (optional).

?1, 2, 3, 4, 5, 6 - preset buttons

You can store six stations on each me- mory bank (I, II, T).

To store a station: Press button during radio operation and hold down until the radio resumes play.

To recall a station: Select the desired memory bank by pressing the FM or TS button as many times as required. Then press the corresponding preset button briefly.

@TA (priority for traffic announcements)

If “TA” is displayed, the system will play traffic stations only.

TA on/off: Press button.

ATS - Travelstore

To store the six most powerful stations automatically with Travelstore:

Store: Press TS until seek tuning starts in the display.

Recall: Press TS, “T” is indicated in the display. Then briefly press one of the presets 1, 2, 3, 4, 5, 6.

BFM

To select one of the FM memory banks I and II.

To change the memory bank: Press button until the desired level is indicated in the display.

Recall: Press FMT as many times until the display shows “T”. Then briefly press one of the preset buttons 1, 2, 3, 4, 5, or 6.

22