take advantage of the full RDS service, switch to “REG OFF”.

Press the REG button briefly.

When active, “REG ON” will be briefly dis- played each time the radio is switched on.

Selecting a waveband

With this car radio you can select between the following wavebands:

FM 87.5 - 108 MHz

MW 531 - 1602 kHz

LW 153 - 279 kHz

Select the desired waveband by pres- sing the FMT or M•L button.

To switch between MW and LW:

Press M•L.

Automatic tuning /

Press /; the car radio will automati- cally search for the next station.

When keeping the upper or lower part / of the rocker switch depressed, seek tuning will speed up in upwards or downwards direc- tion.

Automatic tuning

Up

Down

/ Up/down in short intervals (“AF” must be switched off)

/ To scroll through the broadcasting network when “AF” is activated (e.g. NDR1 ... NDR4).

Manual tuning << >>

(prerequisite: AF is switched off!)

Press << >>; the frequency will change in short intervals in downwards or up- wards direction.

When holding the right or left part of the rocker switch pressed down, the frequency scan is speeded up.

Scrolling through the broad- casting network (only FM)

You can use the << >> buttons to tune in stations of your reception area.

If several programmes of one broadcasting network can be received, you can scroll through them in forwards direction pressing

>>, or backwards using the << button, e.g. NDR 1, 2, 3, 4, N-JOY (North German broad- caster).

For this it is necessary that the stations have been received at least once and that “AF” has been activated before (lights up in the dis- play).

For this purpose, you may start Travelstore seek operation:

Press FMT for 2 seconds; the system starts to run through the frequency band.

If “AF” does not light up,

press AF.

With this, the requirements for selecting sta- tions with << >> are fulfilled.

Changing the memory bank (FM)

You can shift between the memory banks I, II and T in order to store stations and recall them later.

The currently selected memory bank is indi- cated in the display.

Press the FMT button as many times until the desired memory bank lights up in the display.

26

Page 11
Image 11
Blaupunkt RCR 126 Selecting a waveband, Scrolling through the broad- casting network only FM, Changing the memory bank FM