Overview of the DSC factory settings
TA VOL | : 4 |
BEEP | : 3 |
LED (Code) : 1 | |
LOUD | : 4 |
RM | : OFF |
LOCAL | : 1 |
DIS | : 1 |
Appendix
Care notes
Release panel
To ensure that the unit functions properly it is important that the contacts between the re- lease panel and the head unit are free from any foreign particles.
If necessary, clean the contacts using a cot- ton swab soaked with alcohol.
Mechanism/cassette tapes
To avoid possible problems, you should not use cassette tapes longer than 60 or 90 minutes (C60/C90). Store your tapes in a cool place away from dirt, dust and tempera- tures exceeding 50 ° Celsius. Allow very cold tapes to warm up before playing them in order to avoid uneven tape transport. After approximately 100 hours of use, dust partic- les collected on the playback head or roller may lead to tape run problems and sound distortions.
Use a head cleaning tape to remove normal dirt
Specifications
Amplifier |
|
|
Output power: | 4 x 20 W RMS power | |
|
| acc. to DIN 45324 |
|
| (14.4V), |
|
| 4 x 30 W max. power |
Tuner |
|
|
Wavebands |
|
|
FM | : | 87.5 – 108 MHz |
MW | : | 531 – 1602 kHz |
LW | : | 153 – 279 kHz |
FM sensitivity: | 1.0 ∝V at 26 dB | |
|
| |
FM frequency |
| |
response: |
| 35 - 16 000 Hz |
Tape player |
| |
Frequency |
|
|
response: |
| 35 - 16 000 Hz |
Subject to modifications!
32
