Blaupunkt RCR 126 operating instructions Important notes, Precautions, Traffic safety

BRELEASE / CODE-LED Release panel - detachable face. For extra anti-theft protection, you should take the detachable face with you when leaving your car.

To remove it: Press RELEASE.

To re-install the panel: Insert on the left side first with the cassette slot facing up and then press on the right until the panel locks in.

Code LED

May flash for additional theft protection when the car radio is switched off, pro- vided this feature has been adjusted correspondingly via DSC (see DSC CODE-LED).

CRocker switch Seek tuning

Up

Down

/ Up/down in short intervals (“AF” must be switched off)

/ To scroll through the broadcasting network when “AF” is activated (e.g. NDR1 ... NDR4).

Extra functions:

In the DSC mode:

Select and programme DSC functions.

Coding: Enter code and confirm with .

Important notes

Precautions

Before starting to use your new car radio, please read the information on “Traffic safe- ty” and “Anti-theft protection” carefully.

Traffic safety

As the driver of a motor vehicle, it is your responsibility to pay attention to the traffic situation at all times. Never use your car radio in a way that could distract you.

Please keep in mind that you travel a di- stance of 14 m per second at a speed of only 50 km/h.

Should the traffic situation become particu- larly demanding, we advise you not to use the radio.

Always make sure that you are still able to hear any warning signals coming from outsi- de of the vehicle, such as police or fire engine sirens, so that you can react accordingly.

Therefore, you should always select a mode- rate volume for playing your car radio while you are driving.

22