Quick reference
1REL
To release the detachable panel (theft protection).
Press this knob and remove the release panel.
2ON - Power up/down
Press this button to turn the equipment on. It will play at the preset volume. If you press this button briefly during ra- dio reception, the volume will turn down instantly (MUTE).
This function is cancelled by pressing the ON button again. You can pro- gramme the mute volume (refer to “DSC programming”).
Press the button for about 2 seconds to turn the unit off.
Switching on/off via the ignition: If the set has been connected corre- spondingly, it can also be turned on and off with the vehicle ignition. Press the ON button to keep on oper- ating the set when the ignition is switched off.
The set will switch on. To avoid that the battery goes flat, the system will be turned off automatically after one hour of playback.
3Volume knob
Turn the knob to set the volume.
4 
Eject
Press this button to eject the cassette.
5Cassette slot
Insert the tape into the slot with the open side showing to the right. The tape will be played in the direction pre- viously selected.
6Display
Displays all settings, operating modes and functions.
7 
Fast winding
To fast rewind the tape for direction “TAPE 1”.
To fast forward the tape for direction “TAPE 2”.
8 
Fast winding
To fast forward the tape for direction “TAPE 1”.
To fast rewind the tape for direction “TAPE 2”.
7+ 8 Reversing the tape (PROG) Press both buttons simultaneously.
9Rocker switch
Radio mode
/ 
Seek tuning
Up
Down
<</>> Up/down in short intervals
(on FM only if „AF“ is off)
For FM only:
<</>> Scrolling through the broadcasting networks, if AF is on. Example: NDR 1, 2, 4,
Extra function of rocker switch: For additional settings use
AUD F
DSC-MODE E
PTY<
Requirement: The respective function is activated.
:SRC/SC
(SRC = audio source, SC = scan) Press button briefly to select the oper- ating mode (tuner, cassette). The ac- tive mode appears in the display.
DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS
21
