•Select the appropriate waveband by pressing BA/TS.
•Tune in a station with the rocker switch (either automatically 
/
or manually << >>).
•Press the desired preset button until the radio resumes play after the muting (takes approximately 2 seconds, con- firmed by a beep).
Now the station has been stored.
The display will indicate which preset but- ton is currently activated.
Automatically storing the strongest stations with Travel- store
You can automatically store the six most powerful FM stations in your current recep- tion area sorted according to their signal strength. This function is particularly conven- ient on longer trips.
•Press the BA/TS button for 2 seconds.
The six strongest FM stations will be auto- matically stored on the memory bank “T” (Travelstore). When this process has been completed, the radio will play the strongest station.
If desired, stations can also be stored man- ually in the Travelstore bank (see “Storing stations”).
Recalling stored stations
You can recall any stored station at the touch of a button.
•Select the waveband by pressing BA/TS. For FM, also choose the corre- sponding memory bank by pressing the BA/TS button as many times as necessary until the desired bank ap- pears in the display.
•Press the corresponding preset button briefly to recall the station.
Scanning stations with
Radio Scan
You can scan through all of the stations in your reception area.
To start the Scan function:
•Press SRC/SC longer.
The scanned frequency or the station name will start flashing in the display.
During the actual scanning process “SCAN” will appear in the display.
To select a scanned station and switch off the Scan function:
•Press SRC/SC.
If no station is selected, scan will start again.
Selecting the automatic tuning sensitivity
You can alter the automatic tuning sensitiv- ity.
If “lo” is displayed, the radio will only pick up strong, local stations (low sensitivity).
If “lo” does not light up, the radio will also pick up weaker, more distant stations (high sensitivity).
If you would like to alter the sensitivity level please refer to the section on “DSC program- ming – SENS”.
PTY - Programme Type
PTY is an RDS service offered by an in- creasing number of broadcasting stations. This feature allows you to select FM stations according to their programme type.
After you have chosen the PTY of your pref- erence, the corresponding stations can be selected either by seek tuning or using the scan function.
DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS
27
