Recalling stored stations
You can recall any stored station by pressing the corresponding preset button.
•Use the FM or TS button to select the desired memory bank.
For this purpose, press FM until the desired memory bank is indicated in the display.
•Briefly press the desired preset button.
Sampling stored stations briefly
with Preset Scan
You can briefly sample all preset stations of the FM or TS memory bank using the Preset Scan function.
•Press FM or TS.
•Press PS.
The set will sample all stations of the selected memory bank.
Free preset buttons will be skipped. To stop this function:
•Press PS once again.
The radio will continue to play the cur- rently sampled station.
Sampling stations briefly
with Radio Scan
This function allow you to sample the subse- quent stations briefly for approximately 8 se- conds each.
To active Scan:
•press button 1 for approximately 1 second.
Then sampled frequency or the station logo starts flashing in the display. Du- ring the actual searching process, “SCAN” is flashing.
To select a sampled station/switch Scan off:
•press button 1 briefly.
If no station is selected during the scan operation, the radio returns to the station where Scan has been started before.
22
