Blaupunkt RCR 45 operating instructions DSC programming, Care of your audio equipment

Care of your audio equipment

It is advisable to only use C-60/C-90 tapes in your car stereo. Protect your tapes by storing them away from dirt and dust and do not expose them to excessive temperatures (abo- ve 50° C). In order to ensure smooth tape operation, cold tapes should be warmed up before they are played. If dust collects on the rubber roller or on the audio head, problems may arise which affect tape operation or sound quality after approximately 100 hours of operation.

Normally it is sufficient to use a head cleaning cassette to clean your tape player; for tougher cases use a cotton swab (Q-tip) soaked with alcohol. Never use rigid tools to clean your unit!

DSC programming

This car radio offers direct software control (DSC) to adjust a number of default settings to your personal needs and store them.

The following step describes all the default settings which can be changed.

To activate the DSC mode,

•press DSC.

Use the rocker switch to select and change the following adjustments. The default value is shown in the display.

	Select function
Change	+ Change
setting	setting
	Select function

LOCAL	To adjust the tuning sensitivity
	for local reception
	LOCAL 1 - high sensitivity
	LOCAL 3 - low sensitivity
DIS	To adjust the tuning sensitivity
	for distant reception
	DIS. 1 - high sensitivity
	DIS. 3 - low sensitivity
COLOUR	To match the display colour to
	the dashboard illumination.
	Select orange or green.
LOUD	Loudness - To boost low
	bass frequencies.
	LOUD 0 - no boost
	LOUD 6 - strong boost
BEEP	Acknowledgement tone for
	function keys to be hold down
	for more than 2 seconds. Ad-
	just volume between 0 and 9
	(0 = OFF).

25

DEUTSCH

ENGLISH

PORTUGUES ESPAGÑ OL SVENSKA NEDERLAND ITALIANO FRANÇ AIS