CGEO
To adjust the balance (left/right) and fader (front/rear) with the rocker switch.
DAUD
To adjust the treble and bass frequen- cies with the rocker switch.
To switch the Loudness on/off:
Press the AUD button for approximate- ly two seconds until you hear a beep. The Loudness function is active if “LD” appears in the display.
For more information see chapter “DSC programming”.
Fader front
Fader rear
Balance left
Balance right
The last setting will be stored automat- ically.
To switch off GEO: Press button once again.
If the setting remains unchanged with- in four seconds, the display will switch back to the previous condition.
Extra function GEO
Separate balance and fader settings for traffic messages. See chapter “Ad- justing GEO for traffic messages and the warning beep”.
Treble +
Treble –
Bass –
Bass +
The last setting will be stored automat- ically.
To switch off AUD: Press button once again.
If the setting remains unchanged with- in four seconds, the AUD setting will be terminated automatically.
Extra function AUD
Loudness: When listening at a low lev- el, the Loudness function will create a more natural sound by emphasising the low frequency range.
30
