Blaupunkt RD 126 Gest stations with Travelstore Preset Scan, Changing the scan time, Tivity

Automatically storing the stron-	Scanning stored stations with	To select a scanned station and switch
gest stations with Travelstore	Preset Scan	off the Radio-Scan function:
You can automatically store the six most	You can have all of the stored stations	• Press SC briefly.
		If no station is selected, the scan function
powerful FM stations of your current recep-	scanned briefly.
tion area sorted according to their signal	To start Preset Scan:	will be automatically switched off after the
strength. This function is particularly con-		frequency band has been run through com-
	• Press SC for approximately two sec-
venient on longer trips.		pletely. The unit will tune in the station lis-
	onds.
• Press the FMT button for two seconds.		tened to before starting the scan.
	All of the stored stations of the waveband
“T-STORE” will appear in the display.
	will be scanned one after the other. The	Changing the scan time
The six strongest FM stations will be auto-
	scanned frequency or the station name will
matically stored on the memory bank “T” start flashing in the display. During the ac-		The scan time can be changed from be-
(Travelstore). When this process has been	tual scanning process “SCAN” will be dis- tween five to a maximum of 30 seconds.
completed, the radio will play the first sta-
	played.	Please refer to chapter “DSC programming
tion.
	To select a scanned station and switch	- SCANTIME”.
If desired, stations can also be stored
	off Preset Scan:
manually on the Travelstore bank (see “Stor-		Selecting the seek tuning sensi-
ing stations”).	• Press SC briefly.
		tivity

Recalling stored stations

You can recall any stored station by pres- sing the corresponding preset button.

•Select the waveband by pressing FMT or M•L. On FM, also choose the corre- sponding memory bank by pressing the FMT button as many times until the desired bank appears in the display.

•Briefly press the corresponding preset button.

Scanning stations with	You can alter the automatic seek tuning
Radio-Scan	sensitivity.
You can also scan all stations which can be	If “lo” is displayed, the radio will only pick up
	strong, local stations (low sensitivity).
received.
	If “lo” does not light up, the radio will also
To start the Scan function:
	pick up weaker, distant stations (high sen-
• Press SC briefly.
	sitivity).
The scanned frequency or the station name	The sensitivity level can be altered in both
will start flashing in the display. During the	modes (see also chapter “DSC program-

actual scanning process “SCAN” will be dis- ming”). played.

36