Blaupunkt RD 126 Scrolling through the broadcast- ing networks only FM, Storing stations

Models: RD 126

1 24
Download 24 pages 45.76 Kb
Page 13
Image 13

Seek tuning

Up Down

Down in short intervals (“AF” must be switched off) Up in short intervals (“AF” must be switched off)

Manual tuning with << >>

You can also tune in a station manually.

Condition:

AF and PTY must be switched off (i.e. the symbols do not light up in the display).

If necessary, deactivate these functions:

Press AF or PTY.

Manual tuning:

Press << >>; the frequency will change in short intervals in downwards or up- wards direction.

When holding the right or left part of the rock- er switch depressed, the frequency scan is speeded up.

Scrolling through the broadcast- ing networks (only FM)

You can use the << >> buttons to tune in stations of your reception area.

If several programmes of the broadcasting networks can be received, you can scroll through them in forwards direction pressing >>, or backwards using the << button, e.g. NDR 1, 2, 3, 4, N-JOY, FFN, ANTENNE ...

For this it is necessary that the stations have been tuned in at least once and that “AF” is active (lights up in the display).

For this purpose, you may start Travelstore seek operation:

Press FMT for two seconds; the sys- tem starts to run through the frequency band.

If “AF” does not light up,

press AF.

With this, the requirements for selecting sta- tions with << >> are fulfilled.

Changing the memory bank (FM)

You can shift between the memory banks I,

IIand T in order to store stations and recall them later.

The currently selected memory bank is in- dicated in the display.

Press the FMT button as many times until the desired memory bank lights up in the display.

Storing stations

On FM, you can store six stations on the preset buttons 1-6for each of the memory banks I, II and T.

On MW/LW, you can store six stations each.

Select the appropriate waveband with FMT or M•L.

Tune in a station with the rocker switch (either automatically / or manually << >>).

Press the desired preset button until the radio resumes play after the mut- ing (takes approximately two seconds, confirmed by beep).

Now the station has been stored.

The activated preset button is indicated in the display.

Notice:

Should you tune in a station which has al- ready been stored before on another memory bank, the corresponding preset but- ton and the memory bank will briefly flash in the display.

DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS

35

Page 13
Image 13
Blaupunkt RD 126 Scrolling through the broadcast- ing networks only FM, Changing the memory bank FM, Storing stations