Blaupunkt RDM 126 Deactivating the TIM standby, Mode, Recalling stored traffic messag

•	Press / to set the timer.		To repeat a message:			Deactivating the TIM standby
• Press << to set the hours and >> to set			•	Press	once.	mode
	the minutes.		To select one of the older messages (e.g.			The standby mode will be automatically
Once you have completed the setting,			to skip from T4 to T3):			switched off if the car radio is not turned on
•	press	or DSC.	•	Press	as many times as required.	within 72 hours. Switching the set back on
The clock setting for TIMER 1 has been			To select one of the more recent messages			reactivates the standby function.
stored.			(e.g. to skip from T2 to T3):			You can deactivate the TIM standby mode
Proceed		in the same way to set the	•	Press	twice.
			When keeping the left or right part of the			separately for TIMER 1 and TIMER 2.
TIMER 2.
						• Press DSC when the radio is on.
			rocker switch << >> depressed, the mes-
Recalling stored traffic messag-			sage text including its recording time will be			•	Use the rocker switch / to select
es			played back quickly in forwards or back-				“TIMER 1” or “TIMER 2”.
			wards direction.			•	Then press the button and switch to
•	Press TIM briefly.		Press TIM to switch off the function.
							“TIM OFF” by means of the rocker
For example, the display shows “NDR2”
							switch / (you will find this item be-
(station name or frequency), followed by			TIM standby mode while the ra-				tween the clock settings for 23:00 and
“T4 14.30” (T4 = 4th traffic message record- dio is switched off							0:00).
ed at 2:30 p.m.).			The TIM standby mode is active if the dis-			When “TIM OFF” is flashing,
If four traffic messages have been record-
							press .
ed, T4 always represents the most recent			play shows “TIM ON” when switching off the •
bulletin which will also be played back first.			radio.			If you wish to deactivate both timers, pro-
						ceed in the same way to switch the other
If the traffic memory is still empty, “NO TIM”			In this case the radio will record all traffic
						timer to “TIM OFF” as well.
will appear on the display panel.			bulletins broadcast by the tuned in station
						•	Press DSC.
If the display shows four dashes, the clock			for three hours after having turned off the
has not been reset after the last interruption			set. During this period a motor antenna will			Now the TIM standby mode is inactive.
of the power supply.			remain extracted.			After having switched off the radio, the dis-
Use the rocker switch / to play back any			The set will also record the traffic informa-			play will go out immediately and a motor
			tion broadcast for 90 minutes before and			antenna will be pulled in.
of the messages T1 to T4.

after the programmed TIM times. During these periods a motor antenna will also re- main out.

50