Blaupunkt installation instructions Securing the TEV-501 between the front seats

SECURING AND INSTALLING THE TEV-501

Securing the TEV-501 between the front seats

ENGLISH

➮Take one of the straps that does not have an S-hook attached.

➮Place the strap around one of the headrest supports on the driver seat.

➮Fasten the belt around the headrest support using the two buckles.

➮Connect one of the strap’s buckles to the corresponding buckle on the side of the bag. You can adjust the length of the strap to suit the conditions in the vehicle interior.

➮Repeat this procedure for the passenger seat.

➮Now take one of the straps that does have an S-hook attached.

➮Connect the buckle of the S-hook strap with one of the buckles at the lower end of the case.

➮Place the strap around the seat rail of the driver seat or the lower safety belt attachment point.

➮Thread the strap through the S- hook.

➮Pull the strap tight.

17