Blaupunkt Sevilla CD51 Tuning into a station, Setting the sensitivity of the station search mode

RADIO MODE

➮In order to switch between memory

levels or wavebands, briefly press the BND/TS button 5.

Tuning into a station

There are various methods available for tuning into a station.

Automatic station search mode

➮Press the or button :.

The unit tunes into the next receivable station.

Tuning into stations manually

You can also tune into stations manual- ly.

➮Press either the or buttons :.

Note:

●You can only tune into stations manually if the RDS function has first been deactivated.

Browsing through broadcasting networks (only FM)

If a radio station provides several pro- grammes, you have the option of brows- ing through its so-called “broadcasting network”.

➮Press the or button : to move to the next station on the broadcasting network.

Note:

●If you want to use this feature, the RDS function must first be activat- ed.

You will then only be able to switch to stations that you have received once already.To do so, use the Scan or Trav- elstore function.

Setting the sensitivity of the station search mode

You can choose whether you wish to preset only strong or also poor-recep- tion stations.

➮Press the MENU button 8.

➮Press the or button :re- peatedly until “SENS” appears on the display.

➮Press the button :.

The display shows the currently set val- ue for sensitivity. “SENS HI6” denotes maximum sensitivity.“SENS LO1” is the minimum. If “SENS LO” is selected, “lo” appears on the display.

➮Use the buttons : to set the desired degree of sensitivity.

➮When you have completed the set- tings, press the MENU button 8 or the OK buttons ;.

Storing stations

Storing stations manually

➮Select the required FM memory level, FM1, FM2, FMT or either waveband MW or LW (Wiesbaden CD51 does not feature MW and LW).

➮Tune into the desired station.

➮Hold down one of the preset sta- tion buttons 1 - 6 > on which you wish to store the station for more than two seconds.

36