FLIP/RELEASE PANEL
Flip/release panel
Theft protection
Your car radio is fitted with a flip/release panel to guard against theft. Without this panel, the unit is worthless to the thief. Protect your unit from theft by taking the flip/release panel with you every time you leave the car. Do not leave the panel behind in the car, even if it is out of sight. The constructive design of the panel makes for simple handling.
Note:
●Do not drop the flip/release panel.
●Do not expose the flip/release pan- el to direct sunshine or other sourc- es of heat.
●Keep the flip/release panel in the case provided.
●Avoid direct skin contact with the flip/release panel. Please clean it when necessary with some white spirit on a
Removing the flip/release panel
➮First pull the flip/release panel straight and then to the left out of the unit.
●After removing the flip/release pan- el, the unit switches itself off.
●All the current settings are saved.
●If there is a CD in the unit, it re- mains there.
Attaching the flip/release panel
➮Slide the flip/release panel from left to right into the unit guide.
➮Press the left side of the panel into the unit until it slots into place.
Note:
●Do not press against the display while attaching the flip/release pan- el.
ENGLISH
1
➮Press the 
button 1.
This unlatches the flip/release panel.
If the car radio was switched on when the flip/release panel was removed, it comes on again automatically as last set (radio, CD, CD changer or AUX) when the panel is replaced.
31
