Blodgett ZEPHAIRE-E manual Maintenance, Troubleshooting Guide, Possible Causes, Suggested Remedy

Models: ZEPHAIRE-E

1 21
Download 21 pages 27.45 Kb
Page 20
Image 20
Troubleshooting Guide

POSSIBLE CAUSE(S) Maintenance

Troubleshooting Guide

 

POSSIBLE CAUSE(S)

 

SUGGESTED REMEDY

 

 

 

 

 

SYMPTOM: Elements will not heat

 

 

 

 

 

 

S

Oven not plugged in.

S

Plug in electrical supply cord.

S

Power switch on the control panel is off.

S

Set the control panel to COOK or OVEN ON.

S

Control set below ambient temperature.

S

Set to desired cook temperature.

S

Doors are open.

S

Close doors.

 

 

 

 

 

SYMPTOM: Oven does not come to ready.

 

 

 

 

 

S The oven has not reached preheat temperature.

S

Wait for oven to reach preheat temperature.

S Internal problem with main temperature control.

S

*

 

 

 

 

 

SYMPTOM: Convection fan does not run.

 

 

 

 

 

 

S

Oven is not plugged in.

S

Plug in electrical supply cord.

S

Circuit breaker tripped.

S

Reset the breaker.

S

Doors are open

S

Close doors.

 

 

 

 

 

SYMPTOM: General baking problems.

 

 

 

 

 

 

S

Thermostat out of calibration.

S

*

S

Improper oven venting.

S

*

 

 

 

 

*Denotes remedy is a difficult operation and should be performed by qualified personnel only. It is recommended, however, that All repairs and/or adjustments be done by your local Blodgett service agency and not by the owner/operator. Blodgett cannot as- sume responsibility for damage as a result of servicing done by unqualified personnel.

WARNING!!

Always disconnect the power supply before cleaning or servicing the oven.

16

Page 20
Image 20
Blodgett ZEPHAIRE-E manual Maintenance, Troubleshooting Guide, Possible Causes, Suggested Remedy