Blomberg BRFB 1452 SS, BRFB 1450 SS manual Electrical connections

Models: BRFB 1452 SS BRFB 1450 SS

1 39
Download 39 pages 16.14 Kb
Page 5
Image 5

en

en

The device should be located on a smooth surface. The two front feet can be adjusted as required. To ensure that your appliance is standing upright adjust the two front feet by turning clockwise or counter-clockwise, until the product is in firm contact with the floor. Correct adjustment of feet avoids excessive vibration and noise.

Electrical connections

Electrical connections Warning

This appliance must be grounded.

Check whether the power type and voltage your region corresponds to the one stated on the rating label inside the appliance.

The electrical safety of the appliance is only assured when the grounding system in the house is installed in accordance with regulations.

When placing the appliance, do not let the power cable get stuck under it; otherwise the cable will be damaged.

Ensure that the plug remains readily accessible. Do not use a multiple adapter bar or an extension cable.

The electrical specifications of your appliance is given on the rating label located inside the appliance.

Route power cable to allow easy connection and disconnection after installation.

A contact separator should be used if the power cable is not accessible. (for built-in models)

We do not recommend use of extension cord.

3

Page 5
Image 5
Blomberg BRFB 1452 SS, BRFB 1450 SS manual Electrical connections